Motor Sew
Motor Nord
Motor Hyosung
Sản phẩm Norgren
Biến tần ABB
Biến tần Danfoss
Máy bơm chân không
VAN CỔNG
THIẾT BỊ KHÍ NÉN
BIẾN TẦN Schneider
RELAY BẢO VỆ
THIẾT BỊ ĐÓNG CẮT
Sản phẩm Parker
Động cơ Motors
Bộ nguồn
PLC
MÁY ĐO LƯỜNG
THIẾT BỊ TỰ ĐỘNG
Thiết bị điện
Bộ truyền động
PLC Module
Biến tần Servo Delta
CẢM BIẾN
Quạt thông gió
Biến tần
LEVEL SWITCH
DISPLAYS& CONTROLLERS
Chi tiết sản phẩm
PLC Siemens 6ES7132-6BF01-0BA0
- Mã sản phẩm: 6ES7132-6BF01-0BA0
- Giá: Liên hệ
- Lượt xem: 1457
- SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage
- Thông tin sản phẩm
Hãng sản xuất : Siemens
Thông số kỹ thuật :
Product function :
● I&M data : Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of
version
V14
● STEP 7 configurable/integrated as of version V5.5 SP3 or higher
● PCS 7 configurable/integrated as of version V8.1 SP1
● PROFIBUS as of GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● DQ : Yes
● DQ with energy-saving function : No
● PWM : No
● Oversampling : No
● MSO : No
Redundancy
● Redundancy capability : Yes
Supply voltage
Rated value (DC) : 24 V
permissible range, lower limit (DC) : 19.2 V
permissible range, upper limit (DC) : 28.8 V
Reverse polarity protection : Yes
Input current
Current consumption, max. : 35 mA; without load
Output voltage
Rated value (DC) : 24 V
Power loss
Power loss, typ. : 1 W
Address area
Address space per module
● Address space per module, max. 1 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding : Yes
● Mechanical coding element : Yes
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0
● 2-wire connection BU type A0
● 3-wire connection BU type A0 with AUX terminals or potential distributor module
● 4-wire connection BU type A0 + Potential isolation module
Digital outputs
Type of digital output Source output (PNP, current-sourcing)
Number of digital outputs 8
Current-sourcing : Yes
Short-circuit protection : Yes
● Response threshold, typ. 1 A
Limitation of inductive shutdown voltage to Typ. L+ (-50 V)
Controlling a digital input : Yes
Switching capacity of the outputs
● with resistive load, max. : 0.5 A
● on lamp load, max. : 5 W
Load resistance range
● lower limit : 48 Ω
● upper limit : 12 kΩ
Output voltage
● for signal "1", min. L+ (-0.8 V)
Output current
● for signal "1" rated value 0.5 A
● for signal "1" permissible range, max. 0.5 A
● for signal "0" residual current, max. 0.1 mA
Output delay with resistive load
● "0" to "1", max. 50 µs; at rated load
● "1" to "0", max. 100 µs; at rated load
Parallel switching of two outputs
● for uprating : No
● for redundant control of a load : Yes
Switching frequency
● with resistive load, max. : 100 Hz
● with inductive load, max. : 2 Hz
● on lamp load, max. : 10 Hz
Total current of the outputs
● Current per channel, max. : 0.5 A
● Current per module, max. : 4 A
