Nhóm sản phẩm
Motor Sew
Motor Nord
Motor Hyosung
Sản phẩm Norgren
Biến tần ABB
Biến tần Danfoss
Máy bơm chân không
VAN CỔNG
THIẾT BỊ KHÍ NÉN
BIẾN TẦN Schneider
RELAY BẢO VỆ
THIẾT BỊ ĐÓNG CẮT
Sản phẩm Parker
Động cơ Motors
Bộ nguồn
PLC
MÁY ĐO LƯỜNG
THIẾT BỊ TỰ ĐỘNG
Thiết bị điện
Bộ truyền động
PLC Module
Biến tần Servo Delta
CẢM BIẾN
Quạt thông gió
Biến tần
LEVEL SWITCH
DISPLAYS& CONTROLLERS
Chi tiết sản phẩm
Bộ điều khiển ( HDS Drive Controllers ) HDS03.2-W075N-HS12-01-FW
- Mã sản phẩm: HDS03.2-W075N-HS12-01-FW
- Giá: Liên hệ
- Lượt xem: 1116
- HDS03.2-W075N-HS12-01-FW by Rexroth, Indramat, Bosch is a Drive Controller in the HDS Series. The HDS03.2-W075N-HS12-01-FW features a Cooling Type of Air, internal (with built-in blower) and a Rated Current of 75 A. This Controller has a Version of 2 and comes with DIAX04 Controller Family.
It is because of their efforts into letting people understand their drive controllers which makes the HDS03.2-W075N-HS12-01-FW drive controller an excellent product choice for your automation system. This particular model has everything in common with the HDS03.2-W075N-HS11-01-FW except for a few differences in their configuration number. The HDS03.2-W075N-HS12-01-FW accesses its command communication with the use of the SERCOS interface with a 75 A rated current. It also makes use of a firmware which is usually ordered as a separate entity from the drive controller itself. Furthermore, the HDS03.2-W075N-HS12-01-FW makes use of the X3 and X6 Connector with no mounting plate or shield connection cable along with both a small hose clamp and also a big hose clamp. This drive generates warnings that can be separated into two classes on the basis of whether the drive executes an automatic reaction when the warning appears or not. Also, an error message can be generated in a situation where a condition is encountered which no longer allows for proper operation and in this case, the drive will switch itself off until the error message is cleared or a 0-1 edge bit is entered into the controller enable.
The HDS03.2-W075N-HS12-01-FW also makes use of an analog interface which allows it to switch automatically into operation mode the moment the control voltage is switched on. Furthermore, in order to configure the motor for this drive, the parameters for motor features which includes peak current, maximum velocity, etc. has to be entered with DRIVE TOP software using data from the motor data bank. The HDS03.2-W075N-HS12-01-FW can be shipped to any address worldwide with a one-year warranty period from Wake Industrial.
- Thông tin sản phẩm
Hãng sản xuất : Rexroth
Thông số kỹ thuật :
- HDS032W075NHS1201FW
- DRIVE CONTROLLER
- INPUT 530-670 VDC
- 37 AMP
- OUPUT 500 VAC
- 40 AMP
- 1000 HZ
