Nhóm sản phẩm
Motor Sew
Motor Nord
Motor Hyosung
Sản phẩm Norgren
Biến tần ABB
Biến tần Danfoss
Máy bơm chân không
VAN CỔNG
THIẾT BỊ KHÍ NÉN
BIẾN TẦN Schneider
RELAY BẢO VỆ
THIẾT BỊ ĐÓNG CẮT
Sản phẩm Parker
Động cơ Motors
Bộ nguồn
PLC
MÁY ĐO LƯỜNG
THIẾT BỊ TỰ ĐỘNG
Thiết bị điện
Bộ truyền động
PLC Module
Biến tần Servo Delta
CẢM BIẾN
Quạt thông gió
Biến tần
LEVEL SWITCH
DISPLAYS& CONTROLLERS
Chi tiết sản phẩm
Biến tần Schneider ATV12H075M3
- Mã sản phẩm: ATV12H075M3
- Giá: Liên hệ
- Lượt xem: 148
- Biến tần, Altivar 12, 0,75kW, 1hp, 200 đến 240V, 3 pha, có tản nhiệt
- Thông tin sản phẩm
Hãng sản xuất : Schneider
Thông số kỹ thuật :
| Range of product | Altivar 12 |
|---|---|
| product or component type | Variable speed drive |
| Product specific application | Simple machine |
| Mounting mode | Cabinet mount |
| Communication port protocol | Modbus |
| Supply frequency | 50/60 Hz +/- 5 % |
| [Us] rated supply voltage | 200...240 V - 15...10 % |
| Nominal output current | 4.2 A |
| Motor power hp | 1 hp |
| Motor power kW | 0.75 kW |
| Motor power hp | 1 hp |
| EMC filter | Without EMC filter |
| IP degree of protection | IP20 |
| Discrete input number | 4 |
|---|---|
| Discrete output number | 2 |
| analogue input number | 1 |
| analogue output number | 1 |
| Relay output number | 1 |
| Physical interface | 2-wire RS 485 |
| Connector type | 1 RJ45 |
| Continuous output current | 4.2 A at 4 kHz |
| Method of access | Server Modbus serial |
| Speed drive output frequency | 0.5…400 Hz |
| Speed range | 1…20 |
| Sampling duration | 20 ms, tolerance +/- 1 ms for logic input 10 ms for analogue input |
| Linearity error | +/- 0.3 % of maximum value for analogue input |
| Frequency resolution | Analog input: converter A/D, 10 bits Display unit: 0.1 Hz |
| Time constant | 20 ms +/- 1 ms for reference change |
| Transmission rate | 9.6 kbit/s 19.2 kbit/s 38.4 kbit/s |
| Transmission frame | RTU |
| Number of addresses | 1…247 |
| Data format | 8 bits, configurable odd, even or no parity |
| Communication service | Read holding registers (03) 29 words Write single register (06) 29 words Write multiple registers (16) 27 words Read/write multiple registers (23) 4/4 words Read device identification (43) |
| Type of polarization | No impedance |
| 4 quadrant operation possible | False |
| Asynchronous motor control profile | Sensorless flux vector control Voltage/frequency ratio (V/f) Quadratic voltage/frequency ratio |
| Maximum output frequency | 4 kHz |
| Transient overtorque | 150…170 % of nominal motor torque depending on drive rating and type of motor |
| Acceleration and deceleration ramps | Linear from 0 to 999.9 s S U |
| Motor slip compensation | Preset in factory Adjustable |
| Switching frequency | 2...16 kHz adjustable 4...16 kHz with derating factor |
| Nominal switching frequency | 4 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | False |
| Line current | 6.3 A at 100 V (heavy duty) 5.3 A at 120 V (heavy duty) |
| Maximum input current | 5.3 A |
| Maximum output voltage | 240 V |
| Apparent power | 2.2 kVA at 240 V (heavy duty) |
| Maximum transient current | 6.3 A during 60 s (heavy duty) 6.9 A during 2 s (heavy duty) |
| Network frequency | 50...60 Hz |
| Relative symmetric network frequency tolerance | 5 % |
| Prospective line Isc | 5 kA |
| Base load current at high overload | 4.2 A |
